Tremco

Name: Metro Sealant
Telephone: 703-912-4915

Showing all 6 results

NEW!

Paraseal Paragranular : 50 Ib Bentonite

Paragranular is designed to work in conjunction with Paraseal products to form a waterproof transitional seal.

It is used to form a cove at all horizontal to vertical transition, at floor/wall transitions and penetrations through horizontal surfaces, and to fill voids around irregularities.

Saltwater grade Paragranular is also available upon request.

Data Sheet
$26.78
Add to cart MORE INFO
Tremco 250GC Roller : Waterproofing Membrane

TREMproof 250GC can be applied in as little as 24hours following the removal of concrete forms. It can also be applied to damp concrete, reducing the delays associated with rain or other sources of moisture.

The unique ability to catalyze TREMproof 250GC-SL with water when desired will speed cure times, especially in cold temperatures and low relative humidity, to further condense the construction schedule.

TREMproof 250GC can be applied at a rate of up to 120 mils in a single lift to speed application without sacrificing performance.

It can also be applied in multiple lifts to achieve a 215-mil high-build system when maximum protection is required.

Data Sheet
$181.89
Add to cart MORE INFO
NEW!
Tremco Permanent Seam Tape 75′ :
Permanent Seam Tape is used primarily for sealing the seams of Paraseal applications when flood testing is desired.

It is used on all seams of Paraseal Saltwater Grade applications and with Paraseal LG when installed for vaporproofing.

The inherent adhesive and waterproofing properties of the rubberized-asphalt membrane effectively seals the HDPE liner face on Paraseal products to render the bentonite a secondary back-up.
$55.00
Add to cart MORE INFO
Tremco Puma System : Puma Speed Coating

TREMproof PUMA is a cold-applied system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage.

This waterproofing system is ideal for split-slab, paver systems, planters and vegetated roofs.

PUMA technology can be used in both traffic coating (Vulkem EWS) and below grade (TREMproof PUMA) applications.

Delivers extreme durability while maintaining crack-bridging characteristics, eliminating the need for reinforcing fabric

30 to 45-minute cure time between coats; ability to proceed to overburden 1 hour after application.

Can be applied at temperatures as low as 20 °F (-7 °C)

If you need a quote please contact us

Contact Us

TREMproof PUMA Horizontal Data Sheet

Horizontal (PUMA) Application Instructions
Read more
NEW!

Tremco THC 901 : Tremco Polyurethane Sealant

THC-901 can be used for exterior or interior use (with adequate ventilation).

THC-901 is rated to take up to 25% extension and 25% compression of its originally installed width.

Limitations:

Do not apply Tremco THC-901 over damp or contaminated surfaces.

Not intended for continuous water immersion.

Always utilize the accompanying MSDS for information on Personal Protective Equipment (PPE) and Health Hazards.

Data Sheet
$62.00
Add to cart MORE INFO
NEW!

Tremdrain Drainage and protection Boards

TREMDrain Series Drainage and Protection Boards replace or eliminate the need for a separate protection course.

Provide an uninterrupted flow plane and eliminate the opportunity for hydrostatic pressure to form against a wall.

Lightweight and easy to install compared to conventional pipe and stone drainage

Not to be used as an exposed wearing surface. Limit UV exposure to a maximum of 14 days.

Not for use beneath sand-set vehicular pavers.

Data Sheet

$130.00
Add to cart MORE INFO

Tremco

Paraseal Paragranular : 50 Ib Bentonite

Tremco 250GC Roller : Waterproofing Membrane

Tremco Permanent Seam Tape 75′ :

Tremco Puma System : Puma Speed Coating

Tremco THC 901 : Tremco Polyurethane Sealant

Tremdrain Drainage and protection Boards

NP1 Masterseal Sealant Is an Excellent All-Around Polyurethane Sealant

When Should You Use Dymonic FC Tremco Sealant?