Miradrain 9000: Carlisle Drainboard 4 x 50


  • Consistent and proven long-term performance due to a multi-directional core configuration providing a uniform flow path for water to escape
  • High-flow drainage capacity ensuring effective drainage for virtually any horizontal application
  • No-clogging drainage performance
  • High-compressive-strength system withstands overburden stresses
  • Enhances waterproofing system by channeling water away and providing a secondary water retention layer
  • Cost-saving, lightweight, easy-to-install panels eliminate the need for bringing aggregate to the construction site

Technical Data Sheet

Safety Data Sheet

58 in stock (can be backordered)

Miradrain 9000: Carlisle Drainboard 4 x 50

Miradrain 9000 is a high-performance, high-strength drainage composite consisting of a three-dimensional, high-impact polypropylene core and a woven filter fabric. The filter fabric is bonded to the individual dimples of the molded polypropylene core to minimize fabric intrusion into the flow channels caused by overburden pressure. The fabric serves as a filter medium to prevent the passage of particles into the core, while allowing surface moisture to pass freely. CCW Miradrain 9000’s woven, monofilament fabric withstands high abrasion from applied overburden
and prevents intrusion into the drainage core due to its low elongation characteristics. The woven fabric is better suited to receive a directly poured concrete topping than non-woven geo-textile fabrics. Questions? Contact Us
CCW MiraDRAIN 9000 is designed for use in horizontal plaza, roof deck and between-slab drainage applications where single-sided subsurface drainage is required. CCW MiraDRAIN 9000 also serves as a protection course when used in conjunction with CCW Waterproofing Membranes.
CCW MiraDRAIN prefabricated drainage panels may be installed in a variety of construction applications. They may be installed in split slabs, plaza decks and planter applications. CCW MiraDRAIN can be cut with a utility knife or scissors. Concrete may be placed directly onto either side of the panels. The panels can terminate at the top of the footing and are flexible enough to form right angles to cover the top of the footing. CCW MiraDRAIN eliminates the need for a protection course over waterproofing systems. Native soils can be used over CCW MiraDRAIN. (Contact your local CCW representative for specific guidelines). The CCW MiraDRAIN should be attached with CCW CAV-GRIP, CCW Contact Adhesive or SecurTAPE™. Apply CCW CAV-GRIP or CCW Contact Adhesive over entire surface of waterproofing membrane and back side of MiraDRAIN and mate the two surfaces together. For standard installation details, follow the CCW MiraDRAIN detail drawings.
Weight 51 lbs
Dimensions 48 × 18 × 18 in