Prosoco Defacer Eraser Sacrificial Coating SC-1 is a clear, water-based sacrificial coating for control of graffiti on most building surfaces. SC-1 acts as a graffiti barrier, preventing spray paints, crayons and ink from penetrating and staining the underlying surface. Graffiti is removed by high-pressure hot water, Prosoco Defacer Eraser Graffiti Wipe or EnviroKlean SafStrip. The coating must then be reapplied to restore the graffiti barrier. Defacer Eraser® SC-1 allows cost-effective control of chronic graffiti without chemical strippers or abrasives that can damage building surfaces or the surrounding environment. It allows protection of limited areas and spot reapplication without a noticeable change in overall color or appearance. The coating is formulated as a water-thin liquid for spray application to porous and textured surfaces. Questions? Contact Us.
Protect people, vehicles, property and all surfaces not meant for application from product, splash, fumes, residue and wind drift. Plants may be protected with running sprinklers. Protect and/ or divert pedestrian and auto traffic. Remove spill and over spray immediately from horizontal surfaces as they will become extremely slippery. Surface must be clean, dry and absorbent. Do not apply after rain until surface is thoroughly dry. If cleaning is needed, use the appropriate Sure Klean® or Enviro Klean® cleaner. For previously
painted or metal surfaces, most can be coated 20 minutes to one hour after cleaning. Other surfaces should be allowed to thoroughly dry
before treatment. Remove graffiti from unpainted surfaces using Defacer Eraser® Graffiti Wipe or Enviro Klean® SafStrip®. Rinse thoroughly. Application can begin once surface appears dry. On painted surfaces, cover graffiti with a fresh coat of paint. Let the new paint dry thoroughly before applying SC-1. Use clean water heated to 180° F(82° C) to remove SC-1 from painted surfaces. Surface and Air Temperatures Surface and air temperatures should be 40–90° F (4–32° C). Do not apply during rain showers. Protect freshly coated surfaces from rain for two hours following application.
Apply using a garden tank sprayer or conventional airless spray equipment. Adjust tips and pressure for a wide spray pattern. Use only
low pressure for application. Do not atomize. SC-1 is made for spray application but may be applied with a brush or roller.
Storage and Handling:
Keep from freezing. Store in a cool, dry place. Always seal container when not dispensing. Do not alter or mix with other chemicals. Published shelf life assumes upright storage of factory sealed containers in a dry place. Maintain temperatures of 45–100° F (7–38° C). Do not double stack pallets. Dispose of unused product and container in accordance with local, state and federal regulations.