Vulkem 951 NF : Tremco Deck Coating

$483.00

  • Low odor
  • Quick turnaround time
  • Extremely tough topcoats
  • Reduced number of coats for both the medium and heavy duty system.
  • Topcoats need only 24 hours cure prior to vehicular traffic,12 hours cure prior to foot traffic.
  • Please Contact Us For Color and Availability

Data Sheet

43 in stock (can be backordered)

Description

Vulkem 951 NF is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 951 NF may be used to apply a seamless, monolithic waterproof membrane to concrete, well-anchored AC plywood, and primed metal surfaces. Questions? Contact Us.

Vulkem 350NF Base Coat is a single-component, low odor, low VOC, urethane membrane that bonds firmly to clean, dry concrete, plywood and metal. It retains its integrity even if substrate movement causes hair-line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350NF will prevent water migration between itself and the substrate. Vulkem 350NF is available in roller (R) and in self-leveling (SL) grade for vertical and horizontal application.
Vulkem 951NF Top Coat is an aliphatic, low VOC, two-component polyurethane, which when used in conjunction with the recommended aggregate, creates a tough, aesthetically appealing, skid resistant, wearing surface that forms a strong interlaminate bond to the Vulkem 350NF basecoat

Basic Uses:
Vulkem 350NF/951NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces, and similar applications requiring an elastomeric waterproofing system.

Installation:
Concrete shall be water-cured and attain a 3000 psi minimum compressive strength. Concrete finish shall be a light steel trowel followed by a fine-hair broom, or equivalent ICRI #2-#4 finish. Moisture content in the concrete must
be lower than 4.5% as measured using a Tramex CME 4 Moisture Meter. Depending on concrete construction and job site location, additional concrete testing may be required. Please contact your local Tremco Sales or Technical
Representative. Please refer to the Vulkem 350NF/951NF Application Instructions for complete application details. The techniques involved may require modification to adjust to the jobsite conditions. Consult your Tremco Sales
Representative or Tremco Technical Services for site conditions and requirements.

Vulkem Concrete Coatings

Additional information

Weight 20.42 kg
Dimensions 30.48 × 30.48 × 35.56 cm

Reviews

There are no reviews yet.

Be the first to review “Vulkem 951 NF : Tremco Deck Coating”

Your email address will not be published. Required fields are marked *