Euclid Non Shrink Grout: 50lb Bag NS Grout

Note: The contractor and engineer are encouraged to consult and review the Euclid Chemical bulletin: “Cementitious Grout Application Guide”. The document offers instructions detailing the general installation of Euclid Chemical manufactured cement-based grout products. Important: If the contractor is not familiar with standard grout placement techniques, a pre- job meeting is suggested to review the project details unique to the particular job. Contact your local Euclid Chemical representative for additional information.

Mixing Consistency

Fluid Flowable Plastic

Estimated Water Content, 50 lb bag* 1.1 to 1.2 gal (4.2 to 4.6 L) 0.9 to 1.0 gal (3.4 to 3.8 L) 0.8 to 0.9 gal (3.0 to 3.4 L)

* Do not add water in an amount that will cause bleeding or segregation. More or less water may be required to achieve a 25 second flow or the desired placing consistency, depending on temperature and other variables. Do not add sand or cement to the grout since this action will change its precision grouting characteristics.

When NS GROUT will be placed at a depth over 5” (12.7 cm), up to 25 lb (11.3 kg) of pea gravel per 50 lb (22.7 kg) bag [27.5 lb (12.5 kg) of pea gravel per 55 lb (25 kg) bag] must be added to each bag of grout. Note that the water demand to achieve a certain flow level of the grout will change. Once the correct amount of water has been added to a clean mixing pail, mix the grout with a high speed drill and mixing paddle for 3 minutes. Quickly transport the grout to the placement area.

Application: See the “Cementitious Grout Application Guide” for installation means and methods.