Neogard 7797/7798 3G: Peda-Gard Urethane Primer

  • Two-component, high-solids urethane primer
  • Promotes adhesion of elastomeric coatings
  • Can be applied over compatible existing coatings
  • 91% solids with ultra-low 0.01 g/L VOC
  • 300–500 sq. ft./gal coverage
  • 30-minute pot life at 77°F
  • Application range: 40°F to 110°F

Product Data Sheet

Safety Data Sheet

SKU:
540726
540727

Only available in store - contact us for pricing

Neogard 7797/7798 3G: Peda-Gard Urethane Primer

Neogard 7797/7798 (Hempel 254J9/946JB) is a two-component, high solids, low odor urethane primer. Questions about Neogard 7797/7798? Contact Us.

Neogard 7797/7798 Urethane Primer, also identified as Hempel 254JB, is a two-component, high-solids urethane primer designed to improve adhesion between prepared substrates and Neogard elastomeric coating systems. Its low-odor formulation makes it suitable for professional coating applications where strong bonding performance is required.

The primer can be used beneath both standard-cure and fast-cure elastomeric coatings and may also be applied over compatible existing coatings. It provides strong adhesion to concrete, with typical pull-off adhesion of 500 psi, and is also tested for use with several Neogard coating systems.

7797/7798 is a 91% solids material by both weight and volume and has an extremely low mixed VOC content of 0.01 g/L. The product carries LEED BDc4 and IDc4 approvals and a Factory Mutual Class A rating.

The primer is mixed at a 2:1 ratio by volume. Part A should be premixed for 3–5 minutes before adding the curing agent, followed by at least 5 additional minutes of mixing. It can be applied by roller, brush, or spray at approximately 300–500 sq. ft. per gallon and should not be thinned. Pot life is approximately 30 minutes at 77°F.

Application temperatures must remain between 40°F and 110°F. Once the primer has been applied, the subsequent coating should be installed within 24 hours. Neogard 7797/7798 is not recommended for constant immersion and is not compatible with asphaltic compounds.

Version, mixed product 254JB
Mixing ratio: Base 254J9 : Curing Agent 946JB 2 : 1 by volume
Mixing instructions: Pre-mix base for 3–5 minutes before adding curing agent. Mix for a minimum of 5 minutes before applying. Jiffy Mixer paddle recommended.
Application method: Roller, brush, or spray (contact Neogard for spray equipment information)
Recommended application rate: 300–500 sq ft/gallon
Thinner (max.vol.): Do not thin
Pot life: 30 minutes at 77°F (25°C)
Cleaning of tools: HEMPEL’S THINNER 08080 (xylene)

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult Neogard Safety Data Sheets and follow all local or national safety regulations. Use with adequate ventilation.

Surface preparation: According to Neogard Guide Specifications.

Application conditions: Substrate temperature must be ≥40°F (4°C) and <110°F (32°C).

Subsequent coat: According to Neogard Guide Specifications.

Storage temperature: 75°F (23°C)
Remarks: Apply coating within 24 hours of primer application. Not recommended for constant immersion. Not compatible with asphaltic compounds. For on-grade applications, substrates constructed over unvented metal decks or between-slab applications, contact the Neogard Technical Service Department.

Peda-Gard

 

Weight 45 lbs