Neogard 70991: Peda-Gard Sealant
May be used with most building materials, including stone, masonry, ceramic, marble, wood, steel, aluminum, fiber cement board and many other synthetic materials. Easy gunning; reduces installer’s fatigue. Bonds well to most common building materials. Quicker skin and cure time; reduces jobsite dirt pickup.
Certificates/approvals: ASTM C920, Type S, Grade NS, Class 25, Use NT, A and M. US Federal Specification TT-S 00230C (COMB-NBS) for one-component sealants as Class A, non-sag. Canadian Specification CAN/CGSB 19.13-M87. CARB and SCAQMD Compliant. Meets VOC requirements for OTC Regulation.
Neogard 70991: Peda-Gard Sealant
Neogard 70991 (Hempel 47XJB) is a one-component, contractor/construction grade, smooth polyurethane sealant. Questions? Contact Us.
Neogard 70991 is used for sealing the following: expansion and control joints in pre-cast concrete panels; various roofing and siding applications; perimeters of doors, windows, and other wall penetrations.
Application method: Caulking gun
Cleaning: Clean tools with an aromatic solvent. Dry-wipe excess uncured sealant from surfaces, then follow with a solvent wipe. Cured sealant is difficult to remove without damaging the substrate.
Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult Neogard Safety Data Sheets and follow all local or national safety regulations.
Surface preparation: Surface must be clean, sound, and dry. Do not apply over damp, contaminated, loose surfaces, old sealants, or other foreign substances that may impair adhesion. Pre-test substrates with a sample of 70991 before full application.
Application conditions: Do not install when the dew point of the substrate is close to ambient temperature, or if moisturevapor
transmission (MVT) is present. Damp substrates with high moisture content will cause bubbling and foaming. Lower relative humidity and temperature will significantly extend curing time. Confined areas, deep joints, and moisture barrier substrates may also affect the full cure time and extend it by many days. High temperature/humidity can cause bubbles to develop during the curing process.
Subsequent coat: According to Neogard system Guide Specifications. Test paints or coatings for adhesion before general application.
| Weight | 1 lbs |
|---|---|
| Color | Grey, Tan |
