Neogard FC7545/FC7964: Textured Aliphatic Urethane
Features: Integrally textured—aggregate is already added to the material. Meets South Coast Air Quality Management District (SCAQMD) VOC requirements.
Certificates/approvals: LEED: MRc5, IEQc4.2, SSc7.1
Miami-Dade: NOA No.: 14-0902.10, NOA No. 15-0616.03
Neogard FC7545/FC7964: Textured Aliphatic Urethane
Neogard FC7545/FC7964 (Hempel 47RJB) is an integrally textured, two-component, fast-cure, high solids, aliphatic urethane. Questions about Neogard FC7545/FC7964? Contact Us.
Recommended use: As a waterproofing membrane wear coat or topcoat for vehicular traffic surfaces, designed for applications where fast turnaround time and/or solvent-free materials are required.
Features: Integrally textured—aggregate is already added to the material. Meets South Coast Air Quality Management District (SCAQMD) VOC requirements.
Certificates/approvals: LEED: MRc5, IEQc4.2, SSc7.1
Miami-Dade: NOA No.: 14-0902.10, NOA No. 15-0616.03
Availability: Available in North America. Not included in Group Assortment; other regions must confirm.
Version, mixed product 47RJB
Mixing ratio: Base 47RJ9 : Curing Agent 949JB 2 : 1 by volume
Mixing instructions: Pre-mix base for 3–5 minutes before adding curing agent. Mix for a minimum of 5 minutes before applying. Jiffy Mixer paddle recommended.
Application method: Squeegee or roller (do not dip and roll from container)
Thinner (max.vol.): 7055 Odorless Reducer (086JB1L001) (10%)
Pot life: 120 minutes at 75°F (23°C)
Cleaning of tools: Hempel’s Thinner 08080 (xylene)
Safety: Handle with care. Use with adequate ventilation. Before and during use, observe all safety labels on packaging and paint containers, consult Neogard Safety Data Sheets and follow all local or national safety regulations.
Application conditions: Substrate temperature must be between 40°F (4°C) and 110°F (32°C).
Preceding coat: According to Neogard Guide Specifications.
Storage temperature: Store in a cool area to ensure full shelf life. Recommended temperature: 75°F (23°C).
Remarks: Not recommended for constant immersion. Not compatible with asphaltic compounds. For ongrade applications, substrates constructed over unvented metal decks or between-slab applications, contact Neogard Technical Service.
