Xypex Gamma Cure Recommended Uses:
- Applications where water-curing is not possible
- Hot, dry, windy conditions
- Vertical surfaces
Xypex Gamma Cure is available in 3.79 litre bottles.
Xypex products must be stored dry at a minimum temperature of 7ºC. Shelf life is one year when stored under proper conditions.
Gamma Cure (3.79 litres) when diluted with water will cover approximately 75 m2 .
1. Curing of Xypex Coating:
-Dilute one part Gamma Cure with 3 parts clean water. Apply by spraying onto the crystalline waterproofing coating after the coating has reached an initial set, but before it dries (approx. 1 – 2 hours).
2. Preparation of Concrete Substrate in Hot, Dry, Windy Conditions:
-Dilute one part Gamma Cure with 3 parts clean water and apply to concrete surface before application of the Xypex crystalline coating. Gamma Cure should be applied while the concrete is still damp from pre-watering.
Safe Handling Information
Gamma Cure is an acidic solution. This product may be a mild to moderate skin and eye irritant. In addition, many of the components of the cementitious products that are used in conjunction with the Gamma Cure may also possess significant skin and eye irritation potential. Directions for treating these problems are clearly detailed on all Xypex pails and packaging. The Manufacturer also maintains comprehensive and up-to-date Safety Data Sheets on all its products. Each sheet contains health and safety information for the protection of workers and customers. The Manufacturer recommends you contact your local Xypex Technical Services Representative to obtain copies of Safety Data Sheets prior to product storage or use.
For more Information Contact Us