Xypex Concentrate : Concrete Waterproofing Crystallization

$160.00

  • Resists extreme hydrostatic pressure
  • Becomes an integral part of the substrate
  • Can seal static hairline cracks up to 0.4 mm
  • Can be applied to the positive or the negative side of the concrete surface
  • Allows concrete to breathe
  • Highly resistant to aggressive chemicals
  • Non-toxic / no VOCs
  • Does not require a dry surface
  • Cannot puncture, tear or come apart at the seams
  • No costly surface priming or leveling prior to application
  • Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
  • Does not require protection during backfilling or during placement of steel, wire mesh or other materials
  • Less costly to apply than most other methods
  • Not subject to deterioration
  • Permanent
  • Available in white for enhanced illumination

Data Sheet

418 in stock

Description

Xypex Concentrate, when mixed with water, this light grey powder is applied as a cementitious slurry coat to above-grade or below-grade concrete, either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.Questions? Contact us

For normal surface conditions, the coverage rate for each Xypex coat is 6 to 7.2 sq. ft./lb. (1.25 – 1.5 lb./sq. yd. or 0.65 – 0.8 kg/m2).

Xypex

 

  • Reservoirs
  • Sewage and Water Treatment Plants
  • Underground Vaults
  • Secondary Containment Structures
  • Foundations
  • Tunnels and Subway Systems
  • Swimming Pools
  • Parking Structures

Xypex is a unique chemical treatment for the waterproofing, protection and repair of concrete. XYPEX CONCENTRATE consists of Portland cement, finely graded sand and active proprietary chemicals; it is applied as a cementitious slurry to the pre-saturated surface of existing above and below- grade structures. The active chemicals diffuse into the sub- strate and react with moisture and the constituents of hard- ened concrete to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete, as well as cracks, permanently sealing the concrete and preventing the penetration of water and other liquids from any direction, even under high hydrostatic pressure. Xypex Concentrate is also mixed in a Dry-Pac form for sealing strips at con- struction joints, or for the repairing of leaking cracks, faulty construction joints and other defects.

 

Additional information

Weight 27.3 kg
Dimensions 30.48 × 30.48 × 40.64 cm

Reviews

There are no reviews yet.

Be the first to review “Xypex Concentrate : Concrete Waterproofing Crystallization”

Your email address will not be published. Required fields are marked *