NEW!

350 NF Roller Grade : Vulkem Liquid Polyurethane

Same Day Shipping for Orders Placed by 3PM EST

$255.00

Features and Benefits:
• Fast cure through time allows for use 24 hr after installation.
• Low odor and low level of Volatile Organic Compounds (VOC) allow for use in neighbor friendly, inhabited structures.
• Mildew- and fungus- resistance safeguards concrete surfaces against environmental contaminants.
• Excellent durability and UV resistance extend the useful life of pedestrian systems.
• Recoatable and compatible with other Tremco sealants, which enhances waterproofing protection with full system compatibility.

Tremco Data Sheet

 

Description

350 NF Roller is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350 NF Roller may be used to apply a seamless, monolithic waterproof membrane to concrete, well-anchored AC plywood, and primed metal surfaces. Vulkem 350NF Base Coat is a single-component, low odor, low VOC, urethane membrane that bonds firmly to clean, dry concrete, plywood and metal. It retains its integrity even if substrate movement causes hair-line cracks of up to 1/16″ (1.5 mm). If cut or damaged, Vulkem 350NF will prevent water migration between itself and the substrate. Vulkem 350NF is available in roller (R) and in self-leveling (SL) grade for vertical and horizontal application. Questions? Contact Us.

Vulkem 351NF Top Coat is an aliphatic, low VOC, two-component, polyurethane, which when used in conjunction with the recommended aggregate, creates a tough, aesthetically appealing, skid resistant, wearing surface that forms a strong interlaminate bond to the Vulkem 350NF basecoat.

Vulkem 350NF/351NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system.

Installation:
Concrete shall be water-cured and attain a 3000 psi minimum compressive strength. Concrete finish shall be a light steel trowel followed by a fine-hair broom, or equivalent ICRI #2-#4 finish. Moisture content in the concrete must
be lower than 4.5% as measured using a Tramex CME 4 Moisture Meter. Depending on concrete construction and job site location, additional concrete testing may be required. Please contact your local Tremco Sales or Technical
Representative. Please refer to the Vulkem 350NF/351NF Application Instructions for complete application details. The techniques involved may require modification to adjust to the jobsite conditions. Consult your Tremco Sales
Representative or Tremco Technical Services for site conditions and requirements.

Tremco

 

Additional information

Weight 61 lbs
Dimensions 30.48 × 30.48 × 35.56 cm
TOP
Important updates from Metrosealant on Covid-19. Please read
+ +