MasterEmaco P 124


  • Multiple components
  • Suitable for use on concrete and steel
  • Fast cure time is good for limited time jobs
  •  Helps protect metal from corrosion
  • Premeasured components for ease of mixing

Technical Data Sheet

Safety Data Sheet A

Safety Data Sheet B

Safety Data Sheet C

Sealant Coverage Chart

Sealant Quantity Calculator

2 in stock

MasterEmaco P 124: The Ultimate Water-Based Epoxy-Cementitious Bonding Agent
Unlock the power of MasterEmaco P 124, a versatile water-based epoxy-cementitious bonding agent that offers exceptional performance for a wide range of applications. This high-quality product not only bonds plastic concrete to hardened concrete with ease but also provides reliable protection for reinforcing steel against corrosion.
Product Highlights:
– Extended open time for added convenience during application.
– Integral corrosion inhibitor ensures additional protection for reinforcing steel.
– High alkalinity makes it compatible with various cementitious materials.
– Premeasured units simplify the mixing process.
– Blue color facilitates proper coverage, ensuring a flawless finish.
How to Apply:
Surface Preparation:
– Concrete: Ensure the concrete is structurally sound, fully cured (28 days), clean, and prepared as per ICRI Guideline no. 310.2 for proper bonding.
– Reinforcing Steel: Remove oxidation and scale from the exposed reinforcing steel following ICRI Technical Guideline No. 310.1R.
1. Precondition all components to 70°F (21°C) and thoroughly stir each liquid component before mixing.
2. Pour Part A and Part B into a clean mixing bucket, blend for 2 minutes, and slowly add all of Part C. Properly mix using a Jiffy paddle and a drill.
– Bonding plastic concrete to hardened concrete.
– Coating steel rebar for reliable corrosion protection.
– Ideal for areas where short open times prevent the use of traditional epoxies.
Suitable for use on concrete and steel surfaces.
Apply using a stiff-bristled broom or sprayer, ensuring thorough penetration into the substrate. Apply at a rate of 20 wet mils (0.5 mm). For rebar, two coats of 10 mils (0.25 mm) each are required. Protect the bonding agent from direct sunlight and temperatures above 95°F (35°C).
Clean Up:
Clean up with soap and water. For dried material, mechanical removal is necessary.
For Best Performance:
– Maintain substrate and ambient temperature between 40 to 95°F (4 to 35°C).
– When used for overlays or toppings, top within 6 hours of applying MasterEmaco P 124 for best results.
– For other applications, including form and pour applications, it will bond to cementitious materials placed within 24 hours of application.
– Avoid adding any solvent, water, or other materials to the product.
Ensure safety and environmental compliance by following all Safety Data Sheets and product label information for this professional-grade product. Trust MasterEmaco P 124 for outstanding bonding and protection, making it a reliable choice for your concrete repair and reinforcement needs.
Related Products:
Weight 38 lbs
Dimensions 15 × 15 × 15 in