Trempro Chem X Pro 20oz Sausage (Formerly Tremgrip Adhesive)
$15.60
Chem X Pro is a one component, non-sag, elastic, quick tack adhesive based on hybrid polymers. Chem X quick tack adhesive is a second set of hands you can count on for a variety of applications on a number of substrates, limiting extra steps and allowing rapid installation. Application temperature for this product should be 41F to 104F (-40C to 90C)
Out of stock
Chem X Pro Basic Uses
- Chem X Pro is perfect for indoor/outdoor use on a variety of substances including, but not limited to drainage board for backfilled applications, air barrier applications and insulation to air barriers and below-grade membranes
USAGE/PURPOSE:
Chem X has been developed to bond materials to a variety of substrates where an adhesive with extremely high initial green strength is required. Examples of applications include, but are not limited to:
• Drainage board for backfill applications
• Air Barrier Applications
• Insulation to Air Barriers and Below Grade Membranes
PREPARATION:
• Prefit all materials prior to applying the adhesive.
• Protect surrounding area from excess adhesive.
• Chem X Pro typically adheres to common construction substrates without primers. However, Tremco always recommends that a mock-up or field adhesion test be performed on the actual materials being used on the job to verify the need for a primer. For other materials, please contact Tremco Technical Services.
• Non-porous surfaces may need to be roughened with an abrasive to promote better adhesion.
• Surfaces to be bonded must be clean, dry, and free of frost, grease, and any other contaminants.
COLOR:
Grey
PACKAGING:
300 ml cartridge (12 per carton) with removable nozzle.
600 ml sausage (15 per carton).
NECESSARY TOOLS:
Chem X is easy to apply with conventional caulking equipment.
Coverage Rate
See technical Data sheet for coverage rate
LIMITATIONS
Not Suitable for bonding polyethylene, polypropylene, Teflon or nylon. Not recommended for sheet laminate. Do not use as a structural glazing adhesive. Not suitable for bonding of plastics that are sensitive to stress cracking. Not recommended for prolonged exposure to water. Contact with bituminous or tar containing surfaces may lead to discoloration. Staining on natural stone may occur. If 2 non- porous substrates are adhered, the maximum width should not exceed 15 mm.
PLEASE NOTE:
Not Suitable for bonding polyethylene, polypropylene, Teflon® or nylon. Not recommended for sheet laminate. Do not use as a structural glazing adhesive. Not suitable for bonding of plastics that are sensitive to stress cracking. Not recommended for prolonged exposure to water. Contact with bituminous or tar containing surfaces may lead to discoloration. Staining on natural stone may occur. If 2 non- porous substrates are adhered, the maximum width should not exceed 15 mm.
HEALTH & SAFETY PRECAUTIONS:
Safety data sheet must be read and understood before use.
For more information Contact Us
Similar Products:
Perm-A-Barrier NPS: Wall Membrane
Tremdrain NW 4×50 Drainage Board
| Weight | 2 lbs |
|---|---|
| Dimensions | 3 × 3 × 14 in |
Related products
All Products
Concrete
All Products
Control Joints
